Concertina Arrow blades
Concertina Arrow Blades is defined by its blade 50 mm wide belongs to the most aggressive models concertinas, with a space between blades of 100 mm and with 12 points on each blade creating a hook effect.
Concertina Arrow Blades contains extra reinforcement, this reinforcement situated on both sides of the wire and with a height of 2 mm, provides extra reinforcement concertina to increase its strength.
The diameter of this type of concertina is 450 mm – 1500 mm, but we have different action on other models of concertinas, special measures such as 630, 640 or 955 mm.
Concertina Arrow Blades made of stainless steel or galvanized wire high strength 1400 – 1600 Mpa.
The sectors requiring this type of concertinas are places with high levels of security, such as prisons or military bases offer.
Concertina Arrow Blades, 65 mm long blade 8 point hook creating an effect, particularly poignant. Extra center reinforcement.
|Diameter (mm)||Nº Clips||Lineal meters (m)|
|Thickness||Ø Wire||Razor long||Razor width||Space between razors|
|0,5 mm||2,5 mm||50 mm||36 mm||100 mm|
- Stainless Steel EN 1.4016 – AISI 430
- Stainless Steel EN 1.4301 – AISI 304
- Stainless Steel EN 1.4401 – AISI 316
- Heavy Galvanized steel Z230 – Z275 (G75-G90)
- High Tensile: 1400 – 1600 MPa
- Nº Coils: 55±1
Concertina Arrow Blades is manufactured in stainless steel or galvanized steel, in the following characteristics:
Locations with requirement of high security:
- Military Bases
- Explosives Storage