Concertina CT 10
Concertina CT 10 is defined by the blade 10 mm wide and spaced 26 mm knives. Concertina CT 10 made of stainless or galvanized steel and with an aperture of 200 linear meters.
Concertina CT 10, is responsible for increasing the level of safety of a fenced, in the same way you can do a wire fence.
The peculiarity of the concertina CT 10 is not carried in a coil, or expands like an accordion, but twists and expands linearly.
Regarding installation, normal concertina expands like an accordion along the top of an enclosure, the function of concertina CT 10 would fill the interior of the concertina, standing linearly from the post principal of the fence, to the last, forming a protective barrier at the height of the fence and increasing security fence with concertinas.
|Diameter (mm)||Nº Clips||Lineal meters (m)|
|Thickness||Ø Wire||Razor long||Razor width||Space between razors|
|0,5 mm||7,5 mm||10 mm||15 mm||26 mm|
- Stainless Steel EN 1.4016 – AISI 430
- Stainless Steel EN 1.4301 – AISI 304
- Stainless Steel EN 1.4401 – AISI 316
- Heavy Galvanized steel Z230 – Z275 (G75-G90)
- High Tensile: 1400 – 1600 MPa
- Nº Coils: 55±1
Concertina CT 10 is manufactured in stainless steel or galvanized steel, in the following characteristics:
Locations with low security requirement:
- Residential areas
- Juvenile Center
- Country houses
- Railway Workshops
Do you want to buy Concertina CT 10?
Contact us and we will inform you all the information you needContact